Ps3 pad vista pc

Note: Steam actually has native support for the DualShock 3, meaning you can simply plug the controller in and set it up through the Big Picture mode Controller settings menu. However, Steam does not support the DualShock 3's gyro controls or more importantly!

Follow this guide to get the PS3 controller working on PC with those buttons working, too. Download the software linked above, and start by installing the four Microsoft packages. If you're on a Windows 7 PC, you'll also need to install the Xbox controller driver. On Windows 8 and 10, it's already built in!

Now we can start making it work. Bluetooth installation note: if you also want to be able to use the controller wirelessly, make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled.

ScpToolkit notes you need a Bluetooth 2. Download ScpToolkit and run the installer. After accepting the terms and choosing your install location, you'll get a menu of all the options to install, as in the screenshot above.

I recommend leaving this to the default. Click Install to begin the installation. After about 30 seconds, ScpToolkit will be installed, and you'll see this screen, with a big green button that says Run Driver Installer. Since this is a fresh install, that's what we want to do.

This option is on the right side of the window. You'll select your controller from here. You'll see a list of all devices attached to your computer e. Your PS3 controller is the option marked "Wireless Controller Interface [number] " where the number pertains to the USB port to which the controller is attached.

If you're using a non-wired controller, you'll need to select the USB device you're using to facilitate the connection under the "Bluetooth" section above the "DualShock 3 Controllers" drop-down box. It's on the right side of the driver installer window. Doing so will prompt SCP Toolkit to begin installing your controller's drivers, which should take less than five minutes on any compatible PC.

Once the installation is complete, you'll hear a confirmation noise. At this point, your controller's drivers have been installed and you are ready to begin using your controller with PC games. I did everything as instructed. But at the final step on Better DS3, it did not give me the opportunity to click the Apply button. What can I do? You have to select both profile and controller to have the ability to click Apply. Not Helpful 36 Helpful What do I do if it doesn't have a "save profile" message at the bottom of the window and I am on Windows 7?

Set the size to "smaller" and you'll get logged out. Log back in, and you'll find the "Save" button. Not Helpful 19 Helpful Yes, if you have Bluetooth support. They both need the drivers. You can run both by usb or Bluetooth. Not Helpful 11 Helpful It depends on your controller. The stock wireless controllers require special software. I have an unofficial controller and I can just plug and play. Not Helpful 23 Helpful My laptop doesn't support Bluetooth.

I can't do this unless I buy a dongle, right? It depends on your operating system. If you have Windows 10 it will most likely work with a USB charger. Not Helpful 21 Helpful Are you sure I can trust this website?

I downloaded it, but still feel uneasy. When it's open source and has gotten this much attention, it's usually safe. After SCP Toolkit is installed, you can open ScpToolkit Settings Manager to change some settings like disabling rumble, adjusting analog stick deadzones, and more. PS4 controller is blinking white?

How to fix the problem? In this post, you can get 4 solution to it. Try them one by one until it is fixed. Step 1: Make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled. Step 2: You also need to install ScpToolkit.

When you choose features to be installed, you should make sure the ScpToolkit Bluetooth Pair Utility option is ticked. Guess I'm to stupid to do that right. I guess we have to hold our hands out and beg them make a driver for 64 bit. I dual boot vista and ubuntu on my pc, so this will serve me well half the time. I dont play much games for my pc that uses it anymore though. My PC does recognize the controller but it wont work with games.

The whole article is to use a PS3 controller as a PC controller. Buttons are not mapped right - which is weired. Why doesn't the driver map the buttons to their equivalent? These are just numbers the driver reports. Easy to map internally. I also have Vista 64 and it has worked for over a year. I used a Sixaxis controller first, then I got a DS controller and it worked with the same driver.

Why would you want this piece of junk on a pc? You'd be much better off using a controller and not a 2-gram toy wiimote copy piece of trash. All you need is this, a newer method, wired or wireless option here we go. Works wonders for me!

PC PS3 hardcoreware. The story is too old to be commented. FantasyStar d ago Always a good laugh. Agree 3 Disagree 0.